SEAMETRICS IP-80 SERIES - PADDLE WHEEL FLOW METER

High-quality ruby bearings for excellent low-flow performance and long life

One easily-replaced moving part

Pickup exerts no magnetic drag on the rotor

Square-wave frequency output can connect directly to PLC's or counter controls

Indicator or transmitter can be mounted on the flowmeter or remote

Fittings are available in a wide variety of materials and sizes


The IP80-Series are impeller (or “paddlewheel”) insertion meters designed for use with a wide variety of liquids in pipe sizes 1/2" to 8". Sensors are available in brass, 316 stainless steel, PVC, and polypropylene. Bodies are machined from a solid rod for maximum precision. High-quality jewel bearings and nickel-bound tungsten carbide shafts are used for extreme low friction and long life. Low-fow performance is good, although other Seametrics fow meters are recommended where extremely low fows are being measured.
The rotation of the rotor is detected by a non-drag Hall effect sensor. Output is a current-sinking pulse (square wave), which can be sent long distances (up to 2,000 feet) without a transmitter. This signal can be connected directly to PLC's, counters, and computer cards, as well as a variety of Seametrics controls and displays.
Seametrics IP meters are ideal for chemical proportioning applications. If no display is required, a simple divider such as the PD10 provides adjustable pump pacing. For rate and total display, the FT415 (battery powered) or FT420 (loop powered) fow indicator can be mounted directly on the IP80-Series meter, or remotely on a wall or panel. The
AO55 blind analog transmitter can be used to convert to a 4-20 mA output. IP meters are also compatible with the DL76 data logger and FT520 batch processor.The IP80-Series require special fttings that ensure correct depth placement in the pipe. Fittings come in a variety of materials for compatibility with specifc applications. Tee fittings are individually wet-calibrated at the factory and marked with the K-factor (pulses per gallon). Saddle fttings must be feld-installed on the pipe and do not come wet-calibrated.
K-factors for saddles are based on factory-testing.

FEATURES
• Low-friction, long-life jewel bearings
• One moving part
• Fully feld-repairable
• Choice of materials for compatibility
with variety of chemicals
• Fits 1/2” to 8” pipe
• Fixed depth in ftting ensures proper
placement in pipe

APPLICATIONS
• Industrial water/wastewater treatment
• Cooling water monitoring
• Industrial fuid control
• Chemical proportioning


Kembali ke halaman sebelumnya



http://wmaflow.com/seametrics/ip80.html