Sharing information media about flow meter, including type, brand, working principles, and how to operate and setting the flow meter
Rabu, 04 Maret 2015
SEAMETRICS IP-100 SERIES - PADDLE WHEEL FLOW METER
Two sizes fit entire pipe range: IP110 to 10", IP210 to 48"
High-quality ruby bearings for excellent low-flow performance and long life
Pickup exerts no magnetic drag on the rotor
One easily-replaced moving part
Square-wave frequency output can connect directly to PLC's or counter controls
Uses standard NPT threaded pipe fittings or saddles
Compatible with all Seametrics controls
The IP100/200-Series are adjustable depth insertion paddlewheels that come in brass or 316 stainless models to ft 3” to 40” pipe. Installation fttings are standard 1-1/2" (101/201) or 2” (115/215) NPT. Fittings such as saddles and weldolets may be purchased either locally or from Seametrics.
Ruby bearings and a non-drag Hall-effect sensor give these meters the widest flow range of any of the paddlewheel types. A sensor detects the passage of miniature magnets in the six rotor blades. The resulting square-wave signal can be sent for hundreds of feet over unshielded cable without a transmitter and connected directly to many PLC’s and other controls without any additional
electronics.
If desired, a modular system of electronics can be installed directly on the fow sensor or mounted remotely. The FT415
(battery powered) or FT420 (loop powered) fow indicator provides digital rate and total display, as well as programmable
pulse output; the FT420 also provides a 4-20 mA analog output. If a display is not required, the AO55 provides 4-20 mA
analog output, and the PD10 provides a programmable pulse for pump pacing.
The “hot-tap” models (IP115/215) can be installed or serviced without shutting down the line by means of a 2” full-port isola-
tion valve that comes with a nipple for installation on the pipe ftting. In most circumstances, no special tool is required.
FEATURES
• Wide fow range
• One moving part
• Hot tap available
• Modular electronics compatible
• Easily depth adjustable for 3-40” pipe
APPLICATIONS
• Clean water
• Large pipes
• Aquariums, water parks
• Water & wastewater monitoring
Kembali ke halaman sebelumnya
http://wmaflow.com/seametrics/ip100.html
Langganan:
Posting Komentar (Atom)
Tidak ada komentar:
Posting Komentar