Sharing information media about flow meter, including type, brand, working principles, and how to operate and setting the flow meter
Rabu, 04 Maret 2015
SEAMETRICS TX-100 SERIES - TURBINE FLOW METER
Two sizes fit entire pipe range: TX110 to 10", TX210 to 48"
Turbine rotor to optimize minimum flow limits
High quality ruby bearings for long life
One easily-replaced moving part
Square-wave frequency output can connect directly to PLC's or counter controls
Uses standard NPT threaded pipe fittings or saddles
Compatible with all Seametrics controls
Bidirectional indication available as option
The TX100/200-Series are adjustable depth insertion turbines that come in brass or 316 stainless models to ft 3” to 40” pipe. Adapters mate with standard 1-1/2” (110/210) or 2” (150/250) FNPT threaded fttings such as saddles and weldolets which may be purchased either locally or from Seametrics.
Ruby bearings and a non-drag pickoff give these adjustable insertion turbine fow sensors a wide fow range and long life.
A sensor detects the passage of miniature magnets in the rotor blades. The resulting square-wave signal can be sent for hundreds of feet without a transmitter, over unshielded cable.
This signal can be connected directly to many PLC’s and other controls without any additional electronics.If desired, a modular system of electronics can be installed directly on the fow sensor or mounted remotely. The FT415 (battery powered) or FT420 (loop powered) provides digital rate and total display, as well as programmable pulse; the FT420 also provides a 4-20 mA analog output. The AO55 is a blind analog (4-20 mA) transmitter. Programmable pulse for pump pacing is available with the PD10.
The “hot-tap” models (TX150/250) can be installed or serviced without shutting down the line by means of a 2” full-port
isolation valve that comes with a nipple for installation on the pipe ftting. In most circumstances, no special tool is required.
FEATURES
• Wide fow range
• One moving part
• Hot tap available
• Modular electronics compatible
• Easily depth adjustable for 3-40” pipe
APPLICATIONS
• Clean water
• Large pipes
• Aquariums, water parks
• Water & wastewater monitoring
Kembali ke halaman sebelumnya
http://wmaflow.com/seametrics/tx100.html
Langganan:
Posting Komentar (Atom)
Tidak ada komentar:
Posting Komentar