SEAMETRICS PD-10 SERIES - PULSE DIVIDER

Manufactured standard with an LMI pump connector (4 pin or 5 pin) (relay output available for use with other pumps)

Allows easy modification of pulse rate from water meter

Makes small/frequent pulse rate adjustments possible

Works with MJ-Series pulse meters

Alternatively, can be ordered pre-mounted on 80- or 100/200-Series flow sensors



Designed for use as a meter accessory, the PD10 divider is used primarily for pacing electronic metering pumps. Any
number from one to 9999 can be set on rotary switches.
Each time the divider has received the set number of pulses from the meter, it puts out one pulse to stroke the pump.
The PD10 is also useful in boiler and cooling tower feed and bleed operations, and for lowering frequency output of
high frequency meters. Compatible with all Seametrics fow meters, the PD10 creates a programmable pulse meter with
an easily adjustable pulse rate.
The PD10 comes in two different housings: an enclosure that can be mounted near the pump, and a watertight housing
for mounting on the meter.
Power for the PD10 can be supplied by the metering pump if the pump has a sensor power supply. This is the case with
LMI externally-paced metering pumps. Some pumps require an external power supply, available from Seametrics. LMI
and Seametrics connectors are available.

FEATURES
• Easily adjustable rotary switches
• Mates with LMI and other common
metering pumps
• Flexible relay contact output


APPLICATIONS
• Pace electronic metering pumps
• Boiler/cooling tower feed and bleed
• Lower frequency output of high
frequency meters


Kembali ke halaman sebelumnya



http://wmaflow.com/seametrics/pd10.html